Showing posts with label PBS Fabrics. Show all posts
Showing posts with label PBS Fabrics. Show all posts

Tuesday, August 31, 2021

Back to School! Pencil Case Tutorial

School has started! Hallelujah! All 3 of my boys went back to school yesterday, and today is the first full day. Happy dance for Momma!

 So of course, last week we did the official school supply shopping trip. So.many.pencils! Which reminded me of this fun tutorial I put together a couple years ago for PBS Fabrics using the Ring Ring collection. The fabric may be hard to be find by now, but the tute still works! My kids still have (and use, although not for school) these pencil cases. 


This pencil case measures 5-1/2" x 9"--perfect for holding newly sharpened #2s!
 




Ring Ring Pencil Case

You'll Need:
1 fat quarter each of (4) pencil prints and (1) blue dot print
(1) 12" zipper in a coordinating color
(1) 10-1/2" square of fusible batting


Cutting:
From each pencil print:
(1) 3-1/2" x 10-1/2" piece

From the blue dot:
(1) 10-1/2" square
(2) 1-1/2" x 3" pieces

Make the Pencil Case:
Step 1 Sew the (4) 3" x 10-1/2" pencil pieces together lengthwise.


Step 2 Fuse the 10-1/2" batting square to the back and quilt as desired. I stitched 1/4" on each side of the seams.


Step 3 Press in 1/4" on both short ends of the 1-1/2" x 3" blue dot pieces as shown. Fold and press the piece in half. 


Step 4 Tuck the zipper pull end of the zipper into the center fold of a blue dot piece. Stitch across the zipper to secure both sides of the blue dot piece to the zipper as shown. Align the zipper with the pieced bag square and trim the opposite zipper end 1/8" in from the end. Be careful not to pull the zipper apart! 


Step 5 Tuck the raw end of the zipper into the second folded blue dot piece and stitch to secure. Your zipper with tabs should be the same length as the pieced bag square.


Step 6 Trim the blue dot tabs even with the zipper width. 


Step 7 Lay the zipper right side down on the pieced bag square as shown and pin into place.


Step 8 Layer the 10-1/2" blue dot square right sides together on the zipper. Pin into place and stitch, using a zipper foot. 
Step 9 Press the pieced bag square and blue dot square away from the zipper. Topstitch 1/4" from the edge of the zipper. 


Step 10 Align the opposite end of the pieced square with the other side of the zipper, right sides together, and pin. 


Step 11 Fold the blue dot lining square back onto itself and align with the zipper. Pin in place and stitch using a zipper foot. 


Step 12 Turn the case right side out. Topstitch along the second zipper edge is a little trickier. You'll need to manipulate the case so the zipper edge where you're stitching is in the zipper opening, and ensure that the rest of the case doesn't get in the way. 


Step 13 At this point, your case should look like this. Press it flat so the zipper is centered.


Step 14 Turn the case wrong side out. Make sure the zipper is open! Stitch along each end using a 1/4" seam allowance. Use a zig zag stitch to finish off the raw edges. 


Step 15 Turn the case right side out and fill with pencils. 


The pencil print is an obvious choice for this case, but I love this monochromatic version as well. 


Each of my boys ended up making their own cases (with a little help) after I made these first two. This is from 3 years ago--I can't believe how much they've grown since this picture!



If you're new here, welcome! I hope you'll stay and look around a bit. 
If you like what you've seen here, you can also find me:
To find all of my quilt patterns, visit my Etsy shop. 
Find me on IG here.
Find me on Facebook here.
Sign up for my newsletter in the right-hand sidebar or here. 
(You'll receive a free pattern for my Diamond Drama quilt (below) as a thank you!)

Wednesday, June 16, 2021

Summer Coasters Tute with Liquid Vinyl

It's finally summer! I don't know about you, but my family has started eating outside on the deck whenever we can. When Thermoweb sent me a jar of Liquid Vinyl, I knew I wanted to make some weather-resistant placemats for our outdoor meals (bonus with kids--they can be wiped down after they're spilled on!) I used the BBQ Block Party prints from PBS Fabrics, paired with matching solids, to make these placemats. I love the fun prints in this collection--so summery, and perfect for outdoor dining!
Head over to the Thermoweb blog to find my tutorial for these placemats. 


I used the leftover fabric from my placemat project to make these hourglass coasters.


Use the tutorial below to make your own!

You'll Need: (for 2 matching coasters)
(1) 6" print square
(1) 6" solid square
(2) 5" backing squares
(2) 4-1/2" squares HeatnBond Fusible Fleece
HeatnBond Liquid Vinyl
Thermoweb Pressing Paper

Here are my two 6" squares for my coaster:


Making the Coaster:
Step 1
Draw a diagonal line on the wrong side of the 6" print square.


Step 2 Layer the marked square and solid square right sides together and stitch 1/4" on both sides of the drawn line. 


Step 3 Cut on the drawn line. Press both HST units open, pressing the seam allowance toward the solid fabric.


Step 4 Draw a diagonal line on the wrong side of one HST, perpendicular to the seam line. Layer the HSTs right sides together, with the print fabrics opposite each other. Nest the seams and pin in place.


Step 5 Sew 1/4" on both sides of the drawn line. Cut on the line and press both units open. 


Step 6 Trim hourglass unit to measure 5" square. Make sure to align the diagonal line on your ruler with the seam to ensure that your hourglass is centered and the seams intersect each corner. 


Step 7 Position the fusible fleece square to the wrong side of the hourglass unit, centering it so the hourglass unit extends 1/4" on all sides. Fuse in place.


Step 8 Layer the hourglass unit right side up with the backing square on top, right side down. Stitch around all sides using a 1/4" seam allowance and leaving an opening along one side for turning. Tip: Backstitch at the beginning and end of your stitch lines so stitches don't pull out while you're turning the coaster right side out. 


Step 9 Trim corners and turn the coaster right side out (see tip below). Poke the corners out as much as you can. Press the coaster, making sure raw edges are tucked in. Machine quilt the coaster, starting 1/8" from coaster edges to close the opening from turning. 


Turning tip: Before turning the coaster right side out, press the raw edges around the opening as shown. This will make it easier to create a straight folded edge along the opening that you can topstitch shut. 

Step 10 Repeat steps 6-9 with second hourglass unit, backing, and fusible fleece to make a second coaster. 

Step 11 Following manufacturer's directions, applying 1-3 coats of Liquid Vinyl to both sides of the coasters to make them water resistant. Use Pressing Paper to iron coasters between coats as instructed on the directions. 


Enjoy your coasters! And make sure to stop by the Thermoweb blog to find the placemat tutorial!



You can also find me:
To find all of my quilt patterns, visit my Etsy shop. 
Find me on IG here.
Find me on Facebook here.
Sign up for my newsletter in the right-hand sidebar or here.